Changelog
This is the history of changes of amatix-office.
|
amatix-office (0.9-1) unstable; urgency=low * Forward port 80/tcp and 22/tcp to PBX. * Made the hostname editable for the disk installation. -- Amatisoft amatix-office (0.8-2) unstable; urgency=low * Moved the refreshsip service into amatix package. * Moved the 01configurenetwork.sh into amatix package. * Moved the GUI packages from Depends into Recommends. * Start the IPCop firewall also for 1 network card. -- Amatisoft amatix-office (0.8-1) unstable; urgency=low * Added the "pbx", "mail", "data" and "egw" hostnames. * Added the virtual server "egw" to point to egroupware pages (apache configuration). * Replaced the 25ipcop.sh script with /etc/init.d/ipcop and /etc/init.d/refreshsip. * Added IPCop login prompts on tty9 and tty10. -- Amatisoft amatix-office (0.7-2) unstable; urgency=low * Added the egroupware packages. * Added the IMAP server. -- Amatisoft amatix-office (0.7-1) unstable; urgency=low * Added the IAX2 port forwarding rule. * Added support for the static network configuration. -- Amatisoft amatix-office (0.6-3) unstable; urgency=low * Fixed the multiport bug in the IPCop's qos plugin. * Added the qos "stop" and "reload" entries for the firewall.rc.local script. -- Amatisoft amatix-office (0.6-2) unstable; urgency=low * Upgrade to IPCop 1.4.4. * Added the IPCop QoS plugin. * The 'ipcop' init script does not block if IPCop shutdown is hanging. * Clean up the conntrack table (UDP connections) when the RED interface od IPCop is updated. -- Amatisoft amatix-office (0.6-1) unstable; urgency=low * Added the IPCop packages as dependency. * Added the network configuration script for the host system. * Added the script to start IPCop. * Added the script for the configuration of the IPCop root image (postinst). * Added the script which refreshes the Asterisk PBX configuration when the network configuration on the RED interface changes. * Changed the name of the package from amatix-gui to amatix-office. -- Amatisoft amatix-gui (0.4-2) unstable; urgency=low * Actualised the PhoneBook of the SIP phone. -- Amatisoft amatix-gui (0.4-1) unstable; urgency=low * New production version. -- Amatisoft amatix-gui (0.3-3) unstable; urgency=low * New production version. -- Amatisoft amatix-gui (0.3-2) unstable; urgency=low * New production version. -- Amatisoft amatix-gui (0.3-1) unstable; urgency=low * New production version. -- Amatisoft amatix-gui (0.2-1) unstable; urgency=low * Enable all hosts to connect to our Xserver (needed for Firefox startup). -- Amatisoft amatix-gui (0.1-1) unstable; urgency=low * Initial Release. -- Amatisoft |
This is the history of changes of amatix.
|
amatix (0.9-1) unstable; urgency=low * Added the NAT prameter for the SIPEXTEN settings. * Configure the root password for disk installation too. * Load the root password and the hostname from the disk installation. * Fixed the morphixinstaller tool for SCSI installations. * Added the AMIACCESS configuration parameter for the Asterisk Manager Interface. * Added the a2billing billing software. * Added editconfig.sh tool for reconfiguration without rebooting. * Added networkstatus.sh tool to show the network configuration. -- Amatisoft amatix (0.8-2) unstable; urgency=low * Bugfixes in the postinst script. * Enable video for the SIP channels. * Added the "refreshsip" service (moved here from amatix-office). * Removed the 03resetconfig.sh script (not needed anymore). * Moved the hardware specific dependencies from Depends into Recommends. * Replaced the 01configurenetwork.sh with the Office's version. * Enabled the sysklog service in the default configuration. * Added the "editconfig.sh" script to edit the configuration file. * The configuration scripts may be executed at any time. This gives the possibility to reconfigure Amatix without reboot. -- Amatisoft amatix (0.8-1) unstable; urgency=low * Converted the mp3 moh files to wav (CPU saving). * Added the HOSTNAME configuration parameter to define the hostname. * Added the DBACCESS configuration parameters to control the database access. * Added the EMAILRELAY configuration parameter to define the SMTP relay host. * Added the SERVICES configuration parameter to define which services will be started on boot. * Added the CDRDATA and EGWDATA configuration parameters to define the localtion of the asterisk cdr and egroupware databases. * Start Asterisk using the init.d script. -- Amatisoft amatix (0.7-2) unstable; urgency=low * Moved to unionfs 1.0.14. * Store the egroupware data on the writeable device. * Store the email data on the writeable device. * Enable user 'egroupware' to access the 'egroupware' database. * Review the permissions of the files generated by the Amatix scripts. * Run the conversion from pdf to tiff with a lower priority. -- Amatisoft amatix (0.7-1) unstable; urgency=low * Added the configuration parameters for the IAX2 trunks. * Added the configuration parameters for the IAX2 extensions. * Added the NAT configuration parameter (replaces EXTERNIP and LOCALNET). * Added support for the static network configuration. * Added the 'Status' information for the VoIP extensions/trunks. * Removed the 02configwebmail.sh (implemented in debian postinst script). -- Amatisoft amatix (0.6-3) unstable; urgency=low * Added the outgoing prefix configuration parameter for the trunks. * Added the "Services" table on the "Status" page. * Added the EXTERNIP and LOCALNET configuration parameters needed for the SIP trunks when we are behind a NAT router. * Set the context of the outgoing faxes the same as the context of the standard extensions. * Added the configuration parameters for the SIP extensions. * Added the DTMF mode configuration parameter for the SIP trunks. -- Amatisoft amatix (0.6-2) unstable; urgency=low * Documentation update. * Fixed the script which set the root password. * Added the 'mkpasswd' tool to the distribution ('whois' package). * Reverse the /etc/modules after the HDD instalation in order to assign the network interfaces in the same order as on the LiveCD version. -- Amatisoft amatix (0.6-1) unstable; urgency=low * Prepared the SIP configuration file for automatic reconfiguration of the IP settings "externip" and "localnet". * Added the ROOTPASS configuration paramater used to change the root password. * Made the source available under the GNU GPL version 2 license. -- Amatisoft amatix (0.5-2) unstable; urgency=low * Support unknown CallerID for incoming faxes. * Added support for sending faxes (uses spandsp and txfax). -- Amatisoft amatix (0.5-1) unstable; urgency=low * Added support for incoming faxes. * Added the automatic configuration of the VoIP providers using SIP trunks. -- Amatisoft amatix (0.4-2) unstable; urgency=low * Start the Postfix SMTP server in order to get the email notification when a voice message is left into the voicemail mailbox. * The auto-attendant is now reachable from any standard extension by dialing "805". * Added the Direct Inward Dialing (DID) facility for the incoming calls. The protocol of the ISDN controller should be "P2P" and the context "in-did". The Outgoing MSN configuration parameter should be filled with the base number. If your Telco sends only the DID numbers (without the base number), the Outgoing MSN parameter should be set on "-". The "-0" number will be routed to the "incoming" context. -- Amatisoft amatix (0.4-1) unstable; urgency=low * Extend the configuration of the HFC-S cards with the operation mode (TE/NT) and the protocol (P2MP/P2P) parameters. Using the NT operation mode you can connect ISDN phones to Amatix and they will act like normal extensions. * Added the conference room. * Added the call parking facility. * Automatically restart the Asterisk PBX if failures occures. * Replaced the old saveconfig.sh script with a new dialog based script. -- Amatisoft amatix (0.3-3) unstable; urgency=low * Added support for the Sitecom ISDN card DC-105 (misdn). * Bugfix: the mailbox timezone (voicemail.conf). * Bugfix: the path to "oclock" voiceprompt (voicemail.conf). * Moved to the chan_misdn 0.1.1 (fixes the incomplete CID, outgoing DTMF and SIGSEGV issues on the mISDN channels). * Set the callerid for the outgoing mISDN channels (misdn.conf). * Set the callgroup and the pickupgroup for the SIP extensions. -- Amatisoft amatix (0.3-2) unstable; urgency=low * Minor bugfixings for the ZAP autodetection. -- Amatisoft amatix (0.3-1) unstable; urgency=low * Added the init.d scripts needed for the HDD installation. * Added the support webpage for the HDD installation. -- Amatisoft amatix (0.2-10) unstable; urgency=low * Added support for multiple Fritz! PCI cards using a patched version of the AVM's CAPI4Linux drivers and chan_capi. * Upgrade the mISDN sources to the last version from PBX4linux. * Moved to unionfs (replaces cowloop). * Save the /root directory on the storage device. * Wait for postgres to finish its startup before starting Asterisk. -- Amatisoft amatix (0.2-9) unstable; urgency=low * Documentation update. * Added the telephony drivers (isdn, zaptel) on the blacklist of the hotplug. Now the Fritz! PCI v2.0 will be automatically detected. -- Amatisoft amatix (0.2-8) unstable; urgency=low * Added support for USB sticks. -- Amatisoft amatix (0.2-7) unstable; urgency=low * Save the CDR data in the postgresql database. * Added the Asterisk-Stat (see http://areski.net/asterisk-stat-v2/about.php) -- Amatisoft amatix (0.2-6) unstable; urgency=low * Moved to the chan_misdn 0.1.0. * Make the Amatix InstantPBX work with multiple HFC-S cards (maximum 4) -- Amatisoft amatix (0.2-5) unstable; urgency=low * Added the Amatix webpage. * Added the Amatix configuration file and the functions to parse it. * Added the configuration *.in files. * Added the script to configure the timezone on boot. -- Amatisoft amatix (0.2-4) unstable; urgency=low * Added the vmail.cgi wrapper. Now the webmail works :) -- Amatisoft amatix (0.2-3) unstable; urgency=low * Added the mpg123 wrapper. Now the MOH works :) -- Amatisoft amatix (0.2-2) unstable; urgency=low * Added the mISDN channel. * Added the configuration scripts for the outgoing channels. * Configure automatically the zap wcfxo channels. -- Amatisoft amatix (0.2-1) unstable; urgency=low * Added the CAPI channel. * Added the CAPI drivers for the Fritz! PCI cards. -- Amatisoft amatix (0.1-8) unstable; urgency=low * Set the owner asterisk for the installed configuration files. * Create the zaptel device nodes on start time. -- Amatisoft amatix (0.1-7) unstable; urgency=low * Start the asterisk pbx with the user asterisk. -- Amatisoft amatix (0.1-6) unstable; urgency=low * Added zaptel, apache and asterisk-web-vmail as dependencies. -- Amatisoft amatix (0.1-5) unstable; urgency=low * Correct the path of the asterisk sounds in the Amatix scripts. -- Amatisoft amatix (0.1-4) unstable; urgency=low * Added new dependencies. * mount our /lib/modules/2.6.9 when running on Morphix. -- Amatisoft amatix (0.1-3) unstable; urgency=low * Added the kernel-image-2.6.9 and zaptel-modules-2.6.9 as dependencies. -- Amatisoft amatix (0.1-2) unstable; urgency=low * Corrected the asterisk-config dependencies in the control file. -- Amatisoft amatix (0.1-1) unstable; urgency=low * Initial Release. -- Amatisoft |
